HP 9050 HP LaserJet MFP - Analog Fax Accessory Guide - Page 116
Receive-fax messages
UPC - 829160315386
View all HP 9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Receive-fax messages Table 4-2 Receive-fax messages Message Error No. Success n/a Blocked n/a Modem Fail Any Communication Error 17, 36 Communication Error Any besides 17 or 36 Space Fail 0 Page Fail 0 Memory Error 0 Compression Error 0 Print Fail 0 Poll Invalid 0 Job Fail Power Failure No Fax Detected Any 0 17, 36 Description Action(s) Fax received ok. None. Fax reception was blocked by None. receiving fax machine using blocked number feature. Unexpected or bad response from the internal modem to the MFP - example is trying to send a fax just as another fax is arriving. Have fax resent; if the error persists, contact service. Lost telephone connection or Have the sender resend the interruption between sender/ fax (if the sending machine receiver. does not automatically retry). General communications issue where the fax transmission was interrupted or did not proceed as expected. Have fax resent; if the error persists, contact service. Unable to read or write image Have fax resent; if the error file to disk; could be corrupt persists, contact service. MFP disk or no space on disk. Incompatible page width or Have fax resent; if the error page had too many bad lines. persists, contact service. Out of RAM memory on MFP. If error persists, may need to add additional RAM memory to MFP. Corrupted fax - the received Have fax resent; enable ECM image file cannot be decoded. (Error Correction Mode) if not already. Corrupted fax - the received Have fax resent; enable ECM image file cannot be decoded. (Error Correction Mode) if not already. The fax polling feature attempted to retrieve a fax from another machine but no fax was available. Contact the administrator of the fax machine being polled and verify a fax is available, and then retry. Fax failure; this includes all non-specific failures. Have fax resent; if the error persists, contact service. A power failure occurred during the fax reception. Have the sender resend the fax. A voice call was made to the None fax. 108 Chapter 4 Solve fax problems ENWW