HP 9050 HP LaserJet MPF Products - Configuring Security for Multiple MFP Produ - Page 44

Figure 41: The Enable Features option. The following table lists and explains the recommended settings for the Enable Features: option: Feature EWS Config Recommended Setting Enabled NOTE: The recommendation is to disable EWS Config, but you should leave it enabled until you are finished configuring this checklist. Otherwise, it will prevent you from configuring some of the remaining settings. Explanation Disabling EWS Config closes down the EWS and it eliminates the configuration settings that are controlled by the EWS. It also removes the affected settings from Web Jetadmin menus. This includes settings for email, send to folder, and fax. You should disable EWS Config while the MFPs are in use, and enable it only to make changes to the affected configurations. Telnet Config Disabled Disabling Telnet Config prevents access to configuration settings and other features through Telnet. SLP Config Disabled Disabling SLP Config prevents access to configuration settings and other features through SLP. FTP Printing Disabled Disabling FTP Printing prevents access to configuration settings and other features through FTP. It also prevents printing through FTP. LPD Printing Disabled Disabling LPD Printing prevents access to configuration settings and other features through LPD. It also prevents printing through LPD. 9100 Printing Enabled 9100 Printing is the access point for normal printing through standard HP print drivers. IPP Printing Disabled Disabling IPP Printing prevents access to configuration settings and other features through the IPP. It also prevents printing through IPP. MDNS Config Disabled Disabling MDNS Config prevents access to configuration settings and other features through MDNS. 44