HP A3550A User Guide - Page 307

Event code 0x66A 0x66B 0x66C 0x66D 0x680 0x681 0x682 0x683 0x684 0x685 0x686 0x687 0x688 0x689 0x68A 0x68B 0x68C 0x68D Description Soft Vault Load Failure. The SP could not load the saved contents of the Write Cache from disk. However, there were no units with saved data, so Write cache does not need to be loaded. This situation can occur after SP memory is reconfigured. Single Bit Error Detected. The SP has detected a recoverable single bit error. Fan Fault Detected. The SP has detected a single fan fault. Peer SP timed out. The host SP has timed out waiting for the peer SP to reply to a request. Invalid Data Sector Read. The hardware found a bad checksum on a data sector. Invalid Parity Sector Read. The hardware found a bad checksum on a parity sector. Invalid Sector Read. The hardware found a bad checksum on a sector. There is not enough information to tell whether the sector holds data or parity information. Data Sector Reconstructed. The hardware reconstructed a data sector that had a checksum or write stamp error. Parity Sector Reconstructed. The hardware reconstructed a parity sector that had a checksum or write stamp error. Hard Error. The hardware detected an error other than a parity or write stamp error. Command Complete. A command completed after a soft error was corrected. Stripe Reconstructed. Inconsistent write/time stamp in a RAID group were corrected. Command Dropped. An optional command was dropped. Sector Reconstructed. On a read from a RAID-1 mirrored pair, a corrupted sector was reconstructed. Uncorrectable Parity Sector. A hard error on a parity sector could not be corrected. Uncorrectable Data Sector. A hard error on a data sector could not be corrected. Hard Read Checksum Error. A hard checksum error was detected on a data transfer from the host. Soft Read Checksum Error. A soft checksum error was detected on a data transfer from the host. 8-34