HP AH226A HP 8 Internal Port SAS Controller and HP Multi-Port Internal SAS Con - Page 13
Replacing a Controller, Replacement Overview, Preparing the Server - instructions
UPC - 882780748774
View all HP AH226A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
2 Replacing a Controller This chapter provides information on replacing an HP 8 Internal Port PCI-X SAS Controller. This chapter includes the following topics: "Replacement Overview" (page 13) "Preparing the Server" (page 13) "Replacing the Controller" (page 13) "Completing the Controller Replacement" (page 14) NOTE: The HP 8 Internal Port PCI-X SAS Controller is a factory-integrated core I/O card. Online Addition, Deletion, and Replacement are not supported. Replacement Overview The installation procedure involves the following steps: • Preparing the server. • Replacing the controller. • Completing the controller replacement. Preparing the Server To prepare the server for add or replacement, use the following steps: 1. Perform a normal system shutdown. 2. Power down the server. 3. Power down all peripheral devices attached to the server. 4. Unplug the AC power cord from the outlet, and then unplug it from the server. 5. Disconnect all peripheral devices attached to the server. Replacing the Controller WARNING! To reduce the risk of personal injury or damage to the equipment, consult the safety information and user documentation provided with the server before attempting the installation. Many servers are capable of producing energy levels that are considered hazardous and are intended to be serviced only by qualified personnel who have been trained to deal with these hazards. Do not remove enclosures or attempt to bypass any interlocks that may be provided for the purpose of removing these hazardous conditions. WARNING! WARNING! To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. CAUTION: Electrostatic discharge (ESD) can damage electronic components. Be sure that you are properly grounded before beginning this procedure. For more information, see the "Electrostatic Discharge" section of this guide. To replace the PCI-X card, follow these steps: 1. Remove or open the server access panel and locate the PCI/PCI-X bus expansion slots. For instructions on opening the server, see the server documentation at: http://docs.hp.com/en/hw.html 2. Identify the controller that you need to replace. Replacement Overview 13