HP BL480c HP ProLiant BL480c Server Blade Installation Instructions - Page 3

Completing the configuration

Get HP BL480c - ProLiant - 4 GB RAM PDF manuals and user guides
UPC - 882780759664
View all HP BL480c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

4. Push the device bay shelf back until it stops, lift the right side slightly to disengage the two tabs from the divider wall, then rotate the right edge downward (clockwise). 7. Install the server blade. 5. Lift the left side of the device bay shelf to disengage the three tabs from the divider wall, and then remove it from the enclosure. CAUTION: To prevent improper cooling and thermal damage, do not operate the server blade or the enclosure unless all hard drive and device bays are populated with either a component or a blank. 8. Install blanks in any empty bays. For more information, see the enclosure setup and installation guide. Completing the configuration To complete the server blade and HP BladeSystem configuration, see the overview card that ships with the enclosure. 6. Prepare the server blade for installation.

  • 1
  • 2
  • 3
4.
Push the device bay shelf back until it stops, lift the right
side slightly to disengage the two tabs from the divider
wall, then rotate the right edge downward (clockwise).
5.
Lift the left side of the device bay shelf to disengage the
three tabs from the divider wall, and then remove it from
the enclosure.
6.
Prepare the server blade for installation.
7.
Install the server blade.
CAUTION:
To prevent improper cooling and thermal
damage, do not operate the server blade or the
enclosure unless all hard drive and device bays are
populated with either a component or a blank.
8.
Install blanks in any empty bays. For more information,
see the enclosure setup and installation guide.
Completing the configuration
To complete the server blade and HP BladeSystem
configuration, see the overview card that ships with the
enclosure.