HP Bc1500 HP BladeSystem PC Blade Switch Installation Guide - Page 18
First Time Installation, Flow Control, Properties
View all HP Bc1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
2 First Time Installation After completing all external connections, connect a terminal (with terminal emulation software) to the Integrated Administrator 's external DB-9 RS232 serial port. To configure the Integrated Administrator, please refer to the Integrated Administrator documentation. Ensure that the terminal emulation software is configured as follows: 1. Integrated Administrator external serial port: 9600 baud. 2. Set the data format to 8 data bits, 1 stop bit, and no parity. 3. Set Flow Control to none. 4. Under Properties, select VT100 for Emulation mode. 5. Select Terminal keys for Function, Arrow, and Ctrl keys. Ensure that the setting is for Terminal keys (not Windows keys). NOTE: When using HyperTerminal with Microsoft Windows 2000, make sure that Windows 2000 Service Pack 2 or later is installed. With Windows 2000 Service Pack 2, the arrow keys function properly in HyperTerminal VT100 emulation. For more information about Windows 2000 service packs, go to http://www.microsoft.com. 12 Chapter 2 First Time Installation ENWW