HP Brocade 8/12c Fabric OS Encryption Administrator's Guide v6.4.0 (53-1001864 - Page 138
Create a zone configuration that includes the zone you created in step 4. Enter
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
3 Zoning considerations 7. Create a zone that includes the initiator and a LUN target. Enter the zonecreate command followed by a zone name, the initiator PWWN and the target PWWN. FabricAdmin:switch>zonecreate itzone, "10:00:00:00:c9:2b:c9:3a; \ 20:0c:00:06:2b:0f:72:6d" 8. Create a zone configuration that includes the zone you created in step 4. Enter the cfgcreate command followed by a configuration name and the zone member name. FabricAdmin:switch>cfgcreate itcfg, itzone 9. Enable the zone configuration. FabricAdmin:switch>cfgenable itcfg You are about to enable a new zoning configuration. This action will replace the old zoning configuration with the current configuration selected. Do you want to enable 'itcfg' configuration (yes, y, no, n): [no] y zone config"itcfg" is in effect Updating flash ... 120 Fabric OS Encryption Administrator's Guide 53-1001864-01