HP Brocade 8/12c FICON Administrator's Guide v6.4.0 (53-1001771-01, June 2010) - Page 66
System Data Mover topology
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
5 Traffic Isolation Zoning System Data Mover topology Figure 17 shows a cascaded topology which can be used to support an operations recovery site. In this environment, host and storage systems exist at both sites, which are connected by two directors cascaded together using the System Data Mover (SDM) application. The storage differs between the sites. In the production site, the storage is DASD to support fast access for production applications. In the backup site, the storage is tape to support archival operations for system restoration. FIGURE 17 Typical System Data Mover topology The host in the production site operates the SDM application that reads data from the DASD and writes it to the remote tape. The path to the remote site is required to be isolated to support the bandwidth requirements needed to write the data to the remote tape. The host in the backup site needs access to the DASD in the production site to support a hot recovery scenario in the event the production host goes down. Supporting these two functions requires the ability to define overlapping zones that isolate the tape traffic from the DASD traffic and allow local access to the DASD ports. 54 FICON Administrator's Guide 53-1001771-01