HP Brocade 8/12c Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 452

66 SEC-1168 Recommended Action Verify that the security event was planned. If the security event was planned, retry fabric configurations server (FCS) failover after current failover has completed, if this switch should become primary FCS. If the security event was not planned, take appropriate action as defined by your enterprise security policy. Severity ERROR SEC-1168 Message , [SEC-1168], ,, ERROR, , Primary FCS failover is busy. Please retry later. Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1170 Message , [SEC-1170], ,, INFO, , This command must be executed on the Primary FCS switch, the first reachable switch in the FCS list. Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity INFO SEC-1171 Message , [SEC-1171], ,, ERROR, , Disabled secure mode due to invalid security object. Probable Cause Indicates that the switch is segmented, and secure mode is disabled on the switch because there was no license present or no public key infrastructure (PKI) objects. Recommended Run the pkiShow command to check if all PKI objects exist. If they do not exit, run the pkiCreate Action command to create them for the switch. 400 Fabric OS Message Reference 53-1000600-02