HP Brocade 8/24c Brocade Fabric OS Command Reference Manual Supporting Fabric - Page 964
to EX_Ports and Logical Fabric environments., Fabric ID oversubscribed
View all HP Brocade 8/24c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 964 highlights
2 switchShow (downstream) The E_Port is a downstream path away from the principal switch of the fabric. Persistently Disabled This port has been disabled with the portCfgPersistentDisable command. FICON Persistent DID This port has been disabled, because the switch could not obtain its configuration domain ID during the fabric reconfiguration when fmsmode was enabled. See the ficonCupSet help page for more information. Fabric ID conflict Two different fabrics have been assigned the same fabric ID. Applicable only to EX_Ports and Logical Fabric environments. Fabric ID oversubscribed One fabric has been assigned two different fabric IDs (EX_Ports only). AoQ Application-oriented QoS; indicates that an F_Port or N_Port has negotiated a link that is capable of quality of service (QoS). Both sides of the link have QoS capability and agreed on the protocol. The link could be between an HBA and an Access Gateway, between an Access Gateway and an edge switch, or between an HBA and an edge switch. If the Access Gateway cannot negotiate QoS capabilities with the edge switch, an HBA connected to the Access Gateway will not be able to negotiate a QoS link with the Access Gateway. A Server Application Optimization (SAO) license is required to enable QoS at the HBA. An Adaptive Networking license is required both at the Access Gateway and the edge switch to enable QoS. (logical) Indicates a logical port. The switchShow output shows all logical ports currently present in the logical switch. The command displays -1 for the slot for logical ports and the user port number for slot port. The logical port numbers are not persistent and may change when the logical interswitch links (LISLs) are deleted and recreated. A logical port is shown to be in one of the following states: E_Port (if the port is online), offline, or disabled. When the port is disabled, a reason is provided. When used with the -slot option, the command displays the following blade-specific information: slot Slot number. Blade Type Type of blade, for example, Core blade or AP blade. Refer to the slotShow command for a listing of supported blade types. ID A numeric blade ID that specifies the blade type. Refer to the slotShow command for a listing of supported blade IDs. Status Enabled or disabled. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. 932 Fabric OS Command Reference 53-1001764-01