HP Brocade 8/24c Brocade Fabric OS Command Reference Manual Supporting Fabric - Page 990

2 tempShow tempShow Displays temperature readings. Synopsis tempshow Description Use this command to display the current temperature readings of all temperature sensors in a switch. For each sensor, this command displays the slot number (if applicable), the sensor state, and the temperature. The temperature readings are given in both Centigrade and Fahrenheit. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. Refer to the hardware reference manual for your switch to determine the normal temperature range. Operands none Examples To display temperature and status sensors: switch:user> tempshow Index Slot State Centigrade Fahrenheit 1 1 Ok 41 105 2 2 Ok 39 102 3 3 Absent 4 4 Absent 5 5 Ok 26 78 6 6 Ok 27 80 See Also fanShow, psShow, sensorShow, slotShow 958 Fabric OS Command Reference 53-1001764-01