HP Brocade 8/24c Web Tools Administrator's Guide (53-1001772-01, June - Page 219
Configuring the IP route (optional), Editing the IP route, Creating iSCSI virtual targets
View all HP Brocade 8/24c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
DRAFT: BROCADE CONFIDENTIAL Setting up iSCSI Target Gateway services 15 Configuring the IP route (optional) Use the following procedure to configure the IP route. NOTE You can create maximum of 32 static IP routes. 1. Launch the iSCSI Target Gateway Admin module as described on page 188. 2. Select the iSCSI Port tab. 3. From the left pane, select the GbE port to use. 4. Select the IP Routes tab. 5. Click Add. 6. Enter the IP address, subnet mask, and gateway IP address, and the metric. 7. Click Add. Editing the IP route Use the following procedure to edit an IP route. 1. Open the iSCSI Target Gateway Admin module as described in "Launching the iSCSI Target Gateway Admin Module" on page 188. 2. Select the iSCSI Port tab. 3. From the left pane, select the GbE port to use. 4. Select the IP Routes tab. 5. Click Edit. A warning dialog box displays. 6. Click OK. 7. Enter a new value for the metric. 8. Click OK. NOTE If you want to change a value other than the metric, you must delete this route and create another in its place. Creating iSCSI virtual targets SCSI virtual target creation is done from the first pane in the iSCSI Target Gateway Admin module. The iSCSI Virtual Target wizard provides two ways to create iSCSI targets: Create and Easy Create. Create allows you to double check your work several times before committing the changes. Use the following procedure to create an iSCSI virtual target. 1. Open iSCSI Target Gateway Admin module as described in "Launching the iSCSI Target Gateway Admin Module" on page 188. 2. Select the Targets tab. 3. Click Create. Web Tools Administrator's Guide 191 53-1001772-01