HP Brocade BladeSystem 4/12 Brocade OS Command Reference Manual Supporting Fab - Page 560

2 portZoneShow portZoneShow Displays the enforced zone type of the F/FL-ports of a switch. Synopsis portzoneshow Description Use this command to display the enforced zone type of the F/FL-ports of a switch. Output shows virtual port number (decimal), physical port number (decimal), online status (and if online, port type). If the current zone configuration has been disabled by cfgDisable, the fabric is in non-zoning mode, in which all devices see each other. When default zoning is enabled with "No Access" mode, "No Effective configuration: (No Access)" is displayed. Notes This command requires a Brocade Advanced Zoning license. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands none Examples To display the zone membership information of ports: switch:user> portzoneshow [OUTPUT TRUNCATED] PORT: 160 (160) Offline PORT: 161 (161) Offline PORT: 162 (162) Offline PORT: 163 (163) Offline PORT: 164 (164) Offline PORT: 165 (165) Offline PORT: 166 (166) Offline PORT: 167 (167) Offline PORT: 168 (168) FL-Port 0x4332000a PORT: 169 (169) Offline PORT: 170 (170) Offline PORT: 171 (171) Offline PORT: 172 (172) Offline PORT: 173 (173) Offline PORT: 174 (174) Offline PORT: 175 (175) Offline PORT: 176 (176) F-Port 0x4342002a PORT: 177 (177) Offline PORT: 178 (178) Offline PORT: 179 (179) Offline PORT: 180 (180) Offline [OUTPUT TRUNCATED] Enforcement: HARD WWN Enforcement: HARD WWN defaultHard: 0 IFID: defaultHard: 0 IFID: See Also cfgShow, switchShow 534 Fabric OS Command Reference 53-1000599-01