HP C4680 User Guide - Page 73
Ink streaks on the back of the paper, The text edges are jagged - alignment page
UPC - 884420459378
View all HP C4680 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Ink streaks on the back of the paper Try the following solutions if there is smeared ink on the back of your printout. • Solution 1: Print on a page of plain paper • Solution 2: Wait while the ink dries Solution 1: Print on a page of plain paper Solution: Print one or several pages of plain paper to soak up any excess ink in the product. To remove excess ink using plain paper 1. Load several sheets of plain paper in the input tray. 2. Wait five minutes. 3. Print a document with little or no text. 4. Check the back of the paper for ink. If there is still ink on the back of the paper, try printing on another page of plain paper. Cause: Ink accumulated inside the product, where the back of the paper rests during printing. If this did not solve the issue, try the next solution. Solution 2: Wait while the ink dries Solution: Wait at least thirty minutes for the ink inside the product to dry, then try the print job again. Cause: The excess ink in the product needed to dry out. The text edges are jagged Try the following solutions if the text in your printouts is not sharp and the edges are rough. • Solution 1: Use TrueType or OpenType fonts • Solution 2: Align the print cartridges Solution 1: Use TrueType or OpenType fonts Solution: Use TrueType or OpenType fonts to ensure that the product is able to print smooth fonts. When selecting a font, look for the TrueType or OpenType icon. Solve a problem TrueType icon Cause: The font was a custom size. OpenType icon Print quality troubleshooting 71