HP CP2025n HP Color LaserJet CP2020 Series - Software Technical Reference - Page 244
Available PostScript Memory, Output Protocol, Send Ctrl-D Before Each Job, Left arrow, Right arrow
UPC - 883585613670
View all HP CP2025n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
● Wait Timeout ● Minimum Font Size to Download as Outline ● Maximum Font Size to Download as Bitmap ● Postscript Passthrough ● JPEG Passthrough Available PostScript Memory This control specifies the amount of available postscript memory and provides a spin box for changing this value. The available postscript memory is a subset of the product's total physical memory. It is usually best to set the postscript memory to match the total RAM that appears on the configuration page. To print a configuration page from the product control panel, follow these steps: 1. Press OK to open the menus. 2. Press the Left arrow or Right arrow button to navigate to Main menu/Reports. Press OK. 3. Press the Left arrow or Right arrow button to navigate to Reports/Config report. Press OK to print the configuration report. Output Protocol This control specifies the protocol that the product uses for print jobs. The following options are available: ● ASCII (default) ● TBCP ● Binary Click ASCII to send data in ASCII format (7-bit), which might take longer to print but can be sent through any I/O channel, such as a serial or network port. Click TBCP (Tagged Binary Communications Protocol) to send all data except special control characters in binary (8-bit) format. The binary formats can be sent over serial communications ports and are faster than sending data in ASCII format. Click Binary to send all data except special control characters in binary (8-bit) format. The binary formats can be sent over serial communications ports and are faster than sending data in ASCII format. Send Ctrl-D Before Each Job This control specifies whether the product is reset at the beginning of every postscript document. The default setting is No. Pressing Ctrl-D resets the product to its default setting to ensure that previous print jobs do not affect the current print job. Using Ctrl-D might cause a print job to fail if the product is connected through a network. If the document fails to print when sent to a product connected through serial ports, change No to Yes. Send Ctrl-D After Each Job This control specifies whether the product is reset at the end of every postscript document. The default setting is Yes. Pressing Ctrl-D resets the product to its default setting to ensure that future print jobs are HP PCL 6 print driver and HP PS Universal Print Driver for Windows 224 Chapter 4 HP PCL 6 print driver and HP PS Universal Print Driver for Windows ENWW