HP CP2025n HP Color LaserJet CP2020 Series - Software Technical Reference - Page 92
Optimize modes continued, Table 2-8 - drum
UPC - 883585613670
View all HP CP2025n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Software Description Table 2-8 Optimize modes (continued) Adjustment Range (*default) Jam Reduction Heavy Media Optimization Transfer Belt Cleaning Off*/+1 to +2 Transfer Belt Cleaning Voltage Off*/-5 to +5 Transfer Belt Voltage - Y Transfer Belt Voltage - M Transfer Belt Voltage - C Transfer Belt Voltage - K Off*/-5 to +5 Off*/-5 to +5 Off*/-5 to +5 Off*/-5 to +5 Description When this setting is turned on, the interpage gap is increased. Printing performance is reduced slightly. This mode increases transfer belt (ITB) cleaning effectiveness by increasing the ICL (ITB Cleaning) roller/brush voltage for the +1 setting, and by increasing cleaning frequency for the +2 setting. This should be used when the ghost of previous heavy coverage pages appears on following pages. This adjustment allows fine control of the ICL roller/brush voltage. Decreasing the voltage is better for OPC drum ghosting. Increasing the voltage is better for heavy coverage cleaning. This adjustment allows fine control of the Yellow station OPC-to-ITB transfer voltage. (There is currently no known defect associated with this adjustment.) This adjustment allows fine control of the Magenta station OPC-to-ITB transfer voltage. (There is currently no known defect associated with this adjustment.) This adjustment allows fine control of the Cyan station OPC-to-ITB transfer voltage. (There is currently no known defect associated with this adjustment.) This adjustment allows fine control of the Cyan station OPC-to-ITB transfer voltage. (There is currently no known defect associated with this adjustment.) 72 Chapter 2 Software description ENWW