HP Carrier-grade cc2300 User Information and Service Guide - HP Carrier-Grade - Page 51
Viewing Field Replacement Unit FRU Information, Checking System BIOS and Firmware Status
View all HP Carrier-grade cc2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
for that category. Clicking on an individual SDR displays the information for that SDR in the presentation pane in the upper right. The description pane in the lower right displays a description of the currently selected SDR type. 2. Use the F4 and F5 keys to scroll the window contents to the left and right to view all of the columns. 3. Use the Tab key to move from field to field. 4. Use the File and SDR menu items to work with the SDR information: • Open-Views data from a previously saved SDR file. • Save As-Saves the currently loaded SDR data to a file. • Properties-Displays information about the SDR, including IPMI version, number of SDR entries, time stamps for changes to the SDR information, and free space remaining. • Reload-Refreshes the display by reading the SDR data from the server. Viewing Field Replacement Unit (FRU) Information To view FRU information: 1. From the system setup utility Available Tasks window, choose FRU Manager. When you start the FRU Manager, it automatically loads the current list of FRU devices from nonvolatile memory. The FRU manager window has a navigation pane on the left that displays, in a tree format, the inventory of components in the server. The tree has three categories: product, chassis, and board. Clicking on a category expands or collapses a list of components for that category. Clicking on an individual component displays the FRU information for that component in the presentation pane in the upper right. The description pane in the lower right displays a description of the currently selected FRU area. 2. Use the F4 and F5 keys to scroll the window contents to the left and right to view all of the columns. 3. Use the Tab key to move from field to field. 4. Use the File and FRU menu items to work with the FRU information: • Open-Views data from a previously saved FRU file. • Save As-Saves the currently loaded FRU data to a file. • Properties-Displays the number of FRU devices in the system and the number being displayed. Only FRU devices with valid FRU areas are displayed. • Reload-Refreshes the display by reading the current FRU entries from the server. Checking System BIOS and Firmware Status Identify the installed firmware in your system as follows: 1. Insert the HP Server cc3310 Information Diagnostics and Utilities Resource CD into the CD-ROM drive and boot from the CD. 2. After the server has booted, select Load Configuration Wizard. 3. When the wizard begins, press Continue. 4. Select Server Configuration Wizard and Continue. 5. Select run wizard and Continue. 6. Select Load SDR's only on to this server and Continue. 7. Observe that the date, time, and firmware version numbers are now displayed. 8. Select exit to close the wizard. Chapter 5 51