HP Cc3310 UserÆs Guide and Technical UserÆs Guide - HP Carri - Page 102
Power Light Does Not Light, No Characters Appear on Screen, Characters Are Distorted or Incorrect,
View all HP Cc3310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
• CD-ROM drive activity light does not light. • There are problems with application software. • The bootable CD-ROM is not detected. Try the solutions in the order given. If you cannot correct the problem, contact your service representative for help. Power Light Does Not Light Check the following: • Is the system operating normally? If so, the power LED is probably defective or the cable from the front panel to the server board is loose. • Are there other problems with the system? If so, check the items listed under "System Cooling Fans Do Not Rotate Properly." • If all items are correct and problems persist, contact your service representative for help. No Characters Appear on Screen Check the following: • Is the keyboard functioning? Check to see that the "Num Lock" light is functioning. • Is the video monitor plugged in and turned on? • Are the brightness and contrast controls on the video monitor properly adjusted? • Are the video monitor switch settings correct? • Is the video monitor signal cable properly installed? • Is the onboard video controller enabled? If you are using an add-in video controller board, do the following: • Verify that the video controller board is fully seated in the server board connector. • Reboot the system for changes to take effect. • If there are still no characters on the screen after you reboot the system and POST emits a beep code, write down the beep code you hear. This information is useful for your service representative. • If you do not receive a beep code and characters do not appear, the video display monitor or video controller may have failed. Contact your service representative for help. Characters Are Distorted or Incorrect Check the following: • Are the brightness and contrast controls properly adjusted on the video monitor? See the manufacturer's documentation. • Is the video monitor signal and power cable properly installed? • If the problem persists, the video monitor may be faulty or it may be the incorrect type. Contact your service representative for help. System Cooling Fans Do Not Rotate Properly If the system cooling fans are not operating properly, system components could be damaged. 102 cc2300 Carrier Grade Server Product Guide