HP Chromebook 14-2000 Chromebook model numbers 14- x000 through 14-x099 Mainte - Page 31
to which the keyboard cable is attached, and, Release the zero insertion force ZIF connector
View all HP Chromebook 14-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
5. Remove the middle rubber screw cover (3). NOTE: The rubber feet and screw covers are included in the Rubber Kit, spare part number 787721-001. 6. Remove the thirteen Phillips PM1.9×5.7 screws that secure the keyboard/top cover to the base enclosure. 7. Turn the computer right side up with the front toward you. 8. Open the computer as far as it will open. 9. Lift the front edge (1) of the keyboard/top cover until it separates from the front edge of the base enclosure. 10. Lift the left (2) and right sides of the keyboard/top cover until they separate from the left and right sides of the base enclosure. 11. Disconnect the battery cable (3) from the system board. 12. Release the zero insertion force (ZIF) connector (4) to which the keyboard cable is attached, and then disconnect the keyboard cable from the system board. 13. Release the ZIF connector (5) to which the TouchPad cable is attached, and then disconnect the TouchPadd cable from the system board. Component replacement procedures 25