HP Chromebook 14-2000 Chromebook model numbers 14- x000 through 14-x099 Mainte - Page 44

Speakers, from the system board.

Page 44 highlights

Speakers Description Speakers (include left and right speakers and cables) Spare part number 787723-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 23). 5. Remove the battery (see Battery on page 31). Remove the speakers: 1. Disconnect the speaker cable (1) from the system board. 2. Release the speaker cables from the routing clips (2) and channels built into the base enclosure. 3. Remove the speakers (3). Reverse this procedure to install the speakers. 38 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61

Speakers
Description
Spare part number
Speakers (include left and right speakers and cables)
787723-001
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
23
).
5.
Remove the battery (see
Battery
on page
31
).
Remove the speakers:
1.
Disconnect the speaker cable
(1)
from the system board.
2.
Release the speaker cables from the routing clips
(2)
and channels built into the base enclosure.
3.
Remove the speakers
(3)
.
Reverse this procedure to install the speakers.
38
Chapter 5
Removal and replacement procedures