HP Chromebook x360 14a-ca1000 Maintenance and Service Guide - Page 34

WLAN module, Prepare the computer for disassembly see

Page 34 highlights

5. Remove the battery (5) from the computer. To replace the battery, reverse the removal procedures. WLAN module To remove the WLAN module, use this procedure and illustration. Table 5-3 WLAN module descriptions and part number Description Realtek RTL8822CE ac 2 × 2 Wi-Fi + Bluetooth 5.0 (MU-MIMO supported) Spare part number L44796-005 IMPORTANT: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support. Before removing the WLAN module, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 26). 2. Remove the bottom cover (see Bottom cover on page 26). 3. Disconnect the battery cable from the system board (see Battery on page 28). Remove the WLAN module: 1. Remove the shield that secures the wireless antenna cables to the WLAN module. 2. Carefully disconnect the two antenna cables from the module (1). WLAN module 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

5.
Remove the battery
(5)
from the computer.
To replace the battery, reverse the removal procedures.
WLAN module
To remove the WLAN module, use this procedure and illustration.
Table 5-3
WLAN module descriptions and part number
Description
Spare part number
Realtek RTL8822CE ac 2 × 2 Wi-Fi + Bluetooth 5.0 (MU-MIMO supported)
L44796-005
IMPORTANT:
To prevent an unresponsive system, replace the wireless module only with a wireless module
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
26
).
2.
Remove the bottom cover (see
Bottom cover
on page
26
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
28
).
Remove the WLAN module:
1.
Remove the shield that secures the wireless antenna cables to the WLAN module.
2.
Carefully disconnect the two antenna cables from the module
(1)
.
WLAN module
29