HP Cisco MDS 9120 Cisco MDS 9100 Series Hardware Installation Guide (OL-17951- - Page 38
Sliding the Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch onto the Notched, Slider
![]() |
View all HP Cisco MDS 9120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Installing the Switch in a Cabinet or Rack Chapter 2 Installing the Cisco MDS 9100 Series Send documentation comments to [email protected] Figure 2-5 Sliding the Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch onto the Notched Slider Rails 182460 Step 6 Stabilize the switch in the rack by attaching the front rack-mount brackets to the front rack-mounting rails: a. Insert two screws (12-24 or 10-32, depending on rack type) and through the cage nuts and the holes in one of the front rack-mount brackets and into the threaded holes in the rack-mounting rail (see Figure 2-6 or Figure 2-7). b. Repeat for the front rack-mount bracket on the other side of the switch. If you are installing the optional cable guides, place the cable guides in front of the front rack-mount brackets, and then pass the screws through the cable guides, front rack-mount brackets, and mounting rail. You can install one or both cable guides; if installing a single cable guide, it can be installed on either side. 2-10 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02
![](/manual_guide/products/hewlettpackard-aj732a-cisco-mds-9100-series-hardware-installation-guide-ol1795102-2009-727462a/38.png)