HP Cisco MDS 9124 Cisco Nexus 5000 Series Hardware Installation Guide (OL-1590 - Page 27
Location, Function, Color, Status, Description, Table 1-3
View all HP Cisco MDS 9124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Chapter 1 Product Overview Nexus 5020 Switch Send documentation comments to [email protected] Table 1-3 LEDs for the Cisco Nexus 5020 Switch (continued) LED Location Power supply Power supply (front) Function Power supply health Color Green Amber Module Back of chassis Indicator of a fault with any expansion module Green Amber Port LED Back of the chassis Indicates Green LED status Amber Status Solid on Off Solid on 1 Hz Blinking Off On Off Solid on Blinking Off Solid on Solid on Blinking Description Power supply is on and okay. No AC power to the power supply. Power supply failures, over voltage, over current, over temperature. AC is present, 3.3 VSB on, and the power supply is off. Operating normally. All diagnostics pass. The module is operational. The module is not receiving power. The module is booting or running diagnostics. An over temperature condition has occurred. The temperature threshold has been exceeded by a small value during environmental monitoring. An over temperature condition has occurred. The temperature threshold has been exceeded by a large value during environmental monitoring. If the module fails during initial reset, the LED continues to blink and the module does not come online. The module has runtime failure and is brought offline The port is not active or the link is not connected. The port is active. The link is connected and operational. The module or port is disabled through the CLI command or the module is initializing. The port is faulty and has been disabled. OL-15902-01 Cisco Nexus 5000 Series Hardware Installation Guide 1-13