HP Cisco MDS 9124 Cisco Nexus 5000 Series Hardware Installation Guide (OL-1590 - Page 39
Power Supply, Group 2 ports 1 through 8: Fibre Channel
View all HP Cisco MDS 9124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 1 Product Overview Nexus 5010 Switch Send documentation comments to [email protected] A Group 1/ports 1 through 8: 10-Gigabit Ethernet and 1-Gigabit Ethernet capable unencrypted ports B Group 1/ports 1 through 16: Unencrypted Ethernet ports C Group 1/ports 17 through 20: Encrypted Ethernet ports D Group 2 ports 1 through 8: Fibre Channel ports Power Supply The Cisco Nexus 5010 switch uses a front-end power supply. The chassis has slots for two power supplies. Two power supplies can be used for redundancy, but the Cisco Nexus 5010 switch is fully functional with one power supply. Figure 1-30 shows the power supply, which has two LEDs: one for power status and one for failure condition. Figure 1-30 Power Supply for the Cisco Nexus 5010 Switch 1 2 189955 1 Amber fail LED indicates a failure condition. 2 Green power LED indicates the power status. Table 1-5 table describes the status of the two power supply LEDs. Table 1-5 Power Supply LED Descriptions Power Supply Condition Power LED Status No AC power to all power supplies. Off Power supply failure, including over voltage, over current, Off over temperature, and fan failure. Fail LED Status Off On OL-15902-01 Cisco Nexus 5000 Series Hardware Installation Guide 1-25