HP Cisco MDS 9216i Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 47
Symptom, Workaround, logging log, 0x45F0 corresponds to HPUX Volume Set Address <VBUS ID: 0xB
View all HP Cisco MDS 9216i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Caveats Send documentation comments to mdsfeedback-doc.com. • CSCsu84919 Symptom: When hosts are continuously logging into virtual targets (VTs), the iSAPI process might leak memory which might cause the SSM to fail. Workaround: This issue is resolved. • CSCsu98190 Symptom: During an upgrade from Cisco MDS SAN-OS Release 3.3(1c) to Cisco NX-OS 4.1(1b) and later, applications might experience a very small amount of packet drops in the fabric. Most of the applications should be able to recover from such a small packet loss. The problem is seen only with an upgrade from SAN-OS Release 3.3(1c) and is not seen with an upgrade from either SAN-OS Release 3.3(1a) or SAN-OS Release 3.3(1b). Workaround: This issue is resolved. • CSCsv27564 Symptom: In rare cases, following a downgrade from an NX-OS 4.x image to a SAN-OS 3.x image, the available space on the bootflash might be displayed as less than the actual space that is available. Workaround: This issue is resolved. • CSCsx63346 Symptom: If encryption is in use when you open a fabric, you cannot launch Device Manager from Cisco Fabric Manager. Workaround: This issue is resolved. • CSCso63465 Symptom: FCP-CMD (for example, Inquiry) frames targeted to LUN 0x45F0 or LUN 0x50F0 are dropped by an MDS switch when traffic flows (egresses) through Generation 2 modules. LUN 0x45F0 corresponds to HPUX Volume Set Address . Workaround: This issue is resolved. • CSCsr69166 Symptom: Solaris Windows Manager does not resize windows correctly which effects some Device Manager screens. Workaround: This issue is resolved. • CSCsu23984 Symptom: Starting with MDS NX-OS 4.1(1), a password security feature was introduced that allowed a user to enable a secure password standard. However, this feature was not being enforced for SNMP users. Workaround: This issue has been resolved. • CSCsu30034 Symptom: During and In Service Software Upgrade (ISSU), throughput statistics will not be available from the switch undergoing an upgrade. This information will be not able available from the CLI or Device Manager via SNMP. Workaround: This issue is resolved. • CSCsu37199 Symptom: Errors on the management port (mgmt0 or eth1) may be seen in the output of the show logging log command. OL-17675-05 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 47