HP Cisco MDS 9216i Cisco MDS 9500 Series Hardware Installation Guide (OL-17467 - Page 216
Module Specifications
View all HP Cisco MDS 9216i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
Module Specifications Appendix D Technical Specifications Send documentation comments to [email protected]. Table D-4 Physical Specifications for the Cisco MDS 9506 Director (continued) Description Specification Power supply 1900-W, AC input 1900-W, DC input Airflow 300 lfm2 through system fan module, or 80 cfm3 per supervisor, switching, or services module (total of 480 cfm if all slots are filled). Spacing requirements: • If installed in a cabinet, a minimum of 2.5 in. (6.4 cm) is required between the chassis air vents and the cabinet walls. • If installed in an open rack (no side panels), the horizontal distance required between the chassis and any devices that exhaust air towards the chassis is a minimum of 6 in. (15.2 cm), and the distance required between the chassis air vents and any walls is a minimum of 2.5 in. (6.4 cm). 1. RU = rack unit; 1 RU = 1.75 in. (4.45 cm) 2. lfm = linear feet per minute 3. cfm = cubic feet per minute Module Specifications Table D-5 lists the specifications for the Cisco MDS 9500 Series supervisor modules, services modules, and switching modules. Table D-5 Cisco MDS 9500 Series Module Specifications Description Specification Environmental Requirements Temperature, certified for operation 32 to 104°F (0 to 40°C) Temperature, designed and tested 32 to 130°F (0 to 55°C) for operation Temperature, ambient nonoperating -40 to 167°F (-40 to 75°C) and storage Humidity (RH), ambient (noncondensing) operating 10 to 90% Altitude, certified for operation 0 to 6500 ft (0 to 2000 m) Altitude, designed and tested for -200 to 10000 ft (-60 to 3000 m) operation Physical Characteristics Cisco MDS 9500 Series Hardware Installation Guide D-4 OL-17467-02