HP Cisco MDS 9216i Cisco MDS 9500 Series Hardware Installation Guide (OL-17467 - Page 251
Connecting the Console Port to a Computer Using the DB-9 Adapter, COM1 Port, COM1 Port Pinouts
View all HP Cisco MDS 9216i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
Appendix E Cable and Port Specifications COM1 Port Send documentation comments to [email protected]. Connecting the Console Port to a Computer Using the DB-9 Adapter You can use the RJ-45 rollover cable and DB-9F/RJ-45F PC terminal (labeled "Terminal") to connect the console port to a computer running terminal emulation software. Table E-3 lists the pinouts for the console port, the RJ-45 rollover cable, and the DB-9F/RJ-45F PC terminal. Table E-3 Port Mode Signaling and Pinouts with the DB-9 Adapter Console Port RJ-45 Rollover Cable Signal RJ-45 Pin RJ-45 Pin RTS 1 8 DTR 2 7 TxD 3 6 GND 4 5 GND 5 4 RxD 6 3 DSR 7 2 CTS 8 1 DB9F/RJ45F PC Terminal DB-9 Pin 8 6 2 5 5 3 4 7 Console Device Signal CTS DSR RxD GND GND TxD DTR RTS COM1 Port The COM1 port is a serial port with a DB-9 connector. The COM1 port can be connected to a modem using the cable and adapters provided in the accessory kit. COM1 Port Pinouts Table E-4 lists the pinouts for the COM1 port on the Cisco MDS 9500 Series. Note Additional cables and adapters can be ordered from your customer service representative. Table E-4 COM1 Port Pinouts Pin Signal 1 DCD 2 RxD 3 TxD 4 DTR 5 GND 6 DSR 7 RTS OL-17467-02 Cisco MDS 9500 Series Hardware Installation Guide E-3