HP Cisco MDS 9500 Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Rel - Page 10
Migrating from Supervisor-1 Modules to Supervisor-2 Modules, Configuring Generation 2 Switching - series hardware installation guide
View all HP Cisco MDS 9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Software Download Process Send documentation comments to [email protected] switch# show module Mod Ports Module-Type Model Status ... ... 5 0 Supervisor/Fabric-1 DS-X9530-SF1-K9 active* 6 0 Supervisor/Fabric-1 DS-X9530-SF1-K9 ha-standby For a Supervisor-2 module, the output might look like this: switch# show module Mod Ports Module-Type Model Status ... ... 7 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 active * 8 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 ha-standby Migrating from Supervisor-1 Modules to Supervisor-2 Modules As of Cisco MDS SAN-OS Release 3.0(1), the Cisco MDS 9509 and 9506 Directors support both Supervisor-1 and Supervisor-2 modules. Supervisor-1 and Supervisor-2 modules cannot be installed in the same switch, except during migration. Both the active and standby supervisor modules must be of the same type, either Supervisor-1 or Supervisor-2 modules. For Cisco MDS 9513 Directors, both supervisor modules must be Supervisor-2 modules. Caution Migrating your supervisor modules is a disruptive operation. Note Migrating from Supervisor-2 modules to Supervisor-1 modules is not supported. To migrate from a Supervisor-1 module to a Supervisor-2 module, refer to the step-by-step instructions in the Cisco MDS 9000 Family CLI Configuration Guide. Configuring Generation 2 Switching Modules The Cisco MDS 9500 Multilayer Directors are designed to operate with any combination of Cisco MDS 9000 Generation 1 and Generation 2 modules. However, there are limitations to consider when combining the various modules and supervisors in the Cisco MDS 9500 Series platform chassis. The references listed in this section provide specific information about configurations that combine different modules and supervisors. For information on configuring Generation 2 switching modules, refer to the Configuring Generation 2 Switching Modules chapter in the the Cisco MDS 9000 Family CLI Configuration Guide. For information on port index availability, refer to the "Port Index Availability" section in the Product Overview chapter of the Cisco MDS 9500 Series Hardware Installation Guide. For information on Cisco MDS 9000 hardware and software compatibility, refer to the Cisco MDS 9000 SAN-OS Hardware and Software Compatibility Information. Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(2) 10 OL-14116-10