HP Cisco MDS 9500 Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Rel - Page 42
Workaround, Symptom, show logging log, following output
View all HP Cisco MDS 9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Caveats Send documentation comments to [email protected] Workaround: This issue is resolved. • CSCsq69543 Symptom: Fabric Manager does not update Port Channel changes. Workaround: This issue is resolved. • CSCso72230 Symptom: In rare instances, the following Generation 2 modules might reload: - 12-port 4-Gbps Fibre Channel module - 24-port 4-Gbps Fibre Channel module - 48-port 4-Gbps Fibre Channel module - 4-port 10-Gbps Fibre Channel module The output of the show logging log command will have events like those shown below. In the following output, module 7 is the supervisor and module 12 is the module that reloaded. 2008 Jul 15 19:39:30 fcd95c41 %MODULE-4-MOD_WARNING: Module 7 (serial: JAE1134UR88) reported warnings on ports 7/1-7/3 (Unknown) due to BE2 Arbiter experienced an error in device 65 (device error 0xc410d613) 2008 Jul 15 19:39:30 fcd95c41 %MODULE-4-MOD_WARNING: Module 8 (serial: JAE1134UOTD) reported warnings on ports 8/1-8/3 (Unknown) due to BE2 Arbiter experienced an error in device 65 (device error 0xc410d613) 2008 Jul 15 19:39:35 fcd95c41 %XBAR-5-XBAR_STATUS_REPORT: Module 12 reported status for component 88 code 0x40240015. 2008 Jul 15 19:39:35 fcd95c41 %MODULE-2-MOD_DIAG_FAIL: Module 12 (serial: JAE1136VU6L) reported failure on ports 12/1-12/24 (Fibre Channel) due to Fatal runtime Arb error. (DevErr is bitmap of failed modules) in device 88 (device error 0x800) "show logging onboard" will show log similar to the one below for the reloaded module: Logging time: Tue Jul 15 19:39:28 2008 machine check: process swapper (0), jiffies 0x744af3a4 Free pages in zone[0]:0x4a70,zone[1]:0x0,zone[2]:0x0 Stack: c000dd58 c001eefc c000b2c4 c000ae98 d2060e10 c003d7a4 c00f869c c0045cdc d196c584 d196d100 c000c31c c000c3e4 c000ae90 c000c910 c000c924 c0008948 c01ca610 c0000394 Workaround: This issue is resolved. The software workaround for this issue helps reduce instances of module reloads, but does not completely eliminate the problem. Consequently, module reloads might still occur. • CSCsq80132 Symptom: Selecting disks as a part of the tape device configuration causes a CPP SME process failure. Workaround: This issue is resolved. • CSCsr11269 Symptom: When fctimer CFS distribution is enabled, no commit can be successful, and no change can be made. The error message is as following: dctl-m9509-190-NAC-B1(config)# fctimer E_D_TOV 1050 vsan 1 Warning:The vsan will be temporarily suspended when updating the timer value This configuration would impact whole fabric. Do you want to continue? (y/n) y 2008 Jul 1 11:34:39 dctl-m9509-190-NAC-B1 %CFS-2-MTS_REJECT: Verification failed reject MTS message SAP 15:RR-token 0x64f82 Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(2) 42 OL-14116-10