HP Color LaserJet Enterprise MFP 5800dn User Guide - Page 127
General fax send settings, application, and then
View all HP Color LaserJet Enterprise MFP 5800dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Table 7-1 Fax dialing settings (continued) Menu item Description Fax Send Speed The Fax Send Speed setting sets the modem bit rate (measured in bits per second) of the Analog Fax modem while sending a fax. ● Fast (v.34 - 33.6k) ● Medium (v.17 - 14.4k) ● Slow (v.29 - 9.6k) Line Monitor Volume Use the Line Monitor Volume setting to control the printer's dialing volume level when sending faxes. Dialing Mode The Dialing Mode setting sets the type of dialing that is used: either tone (touchtone phones) or pulse (rotary-dial phones). Dialing Prefix The Dialing Prefix setting allows you to enter a prefix number (such as a "9" to access an outside line) when dialing. This prefix number is automatically added to all phone numbers when dialed. Detect Dial Tone The Detect Dial Tone setting determines whether the fax checks for a dial tone before sending a fax. General fax send settings Use the following steps to change the fax send settings. 1. From the Home screen on the printer control panel, navigate to the Settings application, and then select the Settings icon. 2. Open the following menus: a. Fax b. Fax Send Settings c. General Fax Send Settings 3. Configure any of the following settings, and then select Done. Table 7-2 Fax send settings Menu item Description Fax Number Confirmation When the Fax Number Confirmation feature is enabled, the fax number must be entered twice to ensure that it was entered correctly. The feature is disabled by default. PC Fax Send Use the PC Fax Send feature to send faxes from a PC. This feature is enabled by default. General fax send settings 115