HP D2220sb HP D2220sb Storage Blade Maintenance and Service Guide - Page 33
System board
View all HP D2220sb manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
4. Tilt the LED panel away from the front of the D2220sb until the retaining clips are clear of the back of the LED panel, and then remove the LED panel. To replace the component, reverse the removal procedure. System board WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them. CAUTION: To prevent damage to electrical components, properly ground the server blade before beginning any installation procedure. Improper grounding can cause ESD. CAUTION: Do not operate the D2220sb with the access panel open or removed. Operating the D2220sb in this manner results in improper airflow and improper cooling that can lead to thermal damage. To remove the component: 1. Back up all data on the D2220sb. 2. Power down the partner server blade (on page 21). 3. Remove the D2220sb (on page 21). 4. Remove all drives ("Remove the drives" on page 23). 5. Remove the access panel (on page 26). 6. Remove the FBWC capacitor pack ("FBWC capacitor pack" on page 29). 7. Remove the FBWC module ("FBWC module" on page 30). Removal and replacement procedures 33