HP D2220sb HP D2220sb Storage Blade Maintenance and Service Guide - Page 36
Install the pass-through cable cover on the drive drawer., Install the capacitor cover.
View all HP D2220sb manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
12. Remove the system board. To replace the component: 1. Install the system board. 2. Install the pass-through cable in the carrier. Be sure to route the cable under the chassis support rail. 3. Install the pass-through board and cable in the drive drawer. 4. Install the capacitor cover. 5. Install the pass-through cable cover on the drive drawer. 6. Install the FBWC module. 7. Install the FBWC capacitor pack. 8. Install the access panel. 9. Install all drives. Removal and replacement procedures 36
Removal and replacement procedures
36
12.
Remove the system board.
To replace the component:
1.
Install the system board.
2.
Install the pass-through cable in the carrier.
Be sure to route the cable under the chassis support rail.
3.
Install the pass-through board and cable in the drive drawer.
4.
Install the capacitor cover.
5.
Install the pass-through cable cover on the drive drawer.
6.
Install the FBWC module.
7.
Install the FBWC capacitor pack.
8.
Install the access panel.
9.
Install all drives.