HP D2D120 HP StorageWorks D2D Backup System User Guide (EH880-90950, October 2 - Page 107
iSCSI Initiator fails to download, The wizard has not created an autoloader for my host
View all HP D2D120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
iSCSI Initiator fails to download The HP D2D Backup System supports the Microsoft software iSCSI initiator and requires it to be running on each host. If the host does not have the Microsoft iSCSI initiator, it will not be able to connect to the autoloader (or tape drive) configured on HP D2D Backup System and will not be able to perform backups. The Microsoft iSCSI initiator is normally downloaded from the Microsoft website during installation. Download could fail: • If the host machine does not have an internet connection • If Firewall restrictions prevent this process • If Microsoft has relocated the iSCSI initiator files to a different address on their website. • If the process times out due to a slow connection If the process fails: • Check that the HP D2D Backup System and the host machine are still connected to the network. • Check that the iSCSI initiator installed correctly. An icon should have been placed on your desktop. • Manually install and configure the iSCSI Initiator as described in "Advanced installation" on page 45. You may need to temporarily disable the Firewall to download the iSCSI Initiator. It can be re-enabled as soon as the software is downloaded. The wizard has not created an autoloader for my host You can connect a maximum of six hosts to the HP D2D Backup System. If you have already run the Installation wizard on six hosts, you will not be able to install on a seventh. Similarly, the HP D2D Backup System supports a maximum of six tape autoloaders. If you create an additional device for one of your hosts, you reduce the number of hosts that can be connected. D2D Backup System 107