HP D315 Computer Setup (F10) Utility Guide - Page 6
Enable or disable Master Boot Record MBR Security. - manuals
View all HP D315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Computer Setup (F10) Utility Guide I Select Post Messages Enabled or Disabled to change the display status of Power-On Self-Test (POST) messages. Post Messages Disabled suppresses most POST messages, such as memory count, product name, and other non-error text messages. If a POST error occurs, the error is displayed regardless of the mode selected. To manually switch to Post Messages Enabled during POST, press any key (except F1 through F12). I Establish an Ownership Tag, the text of which is displayed each time the system is turned on or restarted. I Enter the Asset Tag or property identification number assigned by your company to this computer. I Enable the power-on password prompt during system restarts (warm boots) as well as during power-on. I Establish a setup password that controls access to Computer Setup (F10) Utility and the settings described in this section. I To secure integrated I/O functionality, including the serial, USB, or parallel ports, audio, or embedded NIC, so that they cannot be used until they are unsecured. I Enable or disable Master Boot Record (MBR) Security. I Enable or disable removable media boot ability. I Enable or disable removable media write ability (when supported by hardware). I Solve system configuration errors detected but not automatically fixed during the Power-On Self-Test (POST). I Replicate your system setup by saving system configuration information on diskette and restoring it on one or more computers. I Execute self-tests on a specified IDE hard drive (when supported by drive). 2 Computer Setup (F10) Utility Guide