HP D6000 HP BladeSystem Deployment Guide for Solutions with 6Gb SAS BL Switche - Page 20
HP 6Gb SAS BL Switch - cabling guide
View all HP D6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
HP 6Gb SAS BL Switch The HP 6Gb SAS BL Switch (SAS BL switch) is HP's second-generation c-Class embedded SAS switch designed to provide external storage for HP c-Class server blades, providing 6Gb transfer speeds. Key features of the HP 6Gb SAS BL Switch: • 6Gb SAS links through the BladeSystem c-Class enclosure high-speed mid-plane to the server bays • Sixteen internal SAS connections to BladeSystem c-Class server bays (2x links) • Eight external SAS ports for connections to HP external SAS storage enclosures (4x links) • High data bandwidth up to 2400MB/s per external SAS port (600 MB/s per link; 600MB/s x 4 links =2400 MB/s per port) • 8x (high performance) SAS cabling support when attached to MDS600 or D6000 storage enclosures • Dual-domain support, when two HP 6Gb SAS BL Switches are installed in the same BladeSystem interconnect bay row • Zoning support • Embedded HP Virtual SAS Manager software for switch management and zoning tasks The HP 6Gb SAS BL Switch is a single-wide form factor and consumes one BladeSystem c-Class enclosure interconnect bay. Dual-domain configurations use two HP 6Gb SAS BL Switches installed in the same interconnect bay row. For BladeSystem c3000 and c7000 enclosures, the SAS BL Switch can be installed in the following interconnect bays: BladeSystem enclosure model Supported interconnect bays c3000 3 and 4 c7000 3, 4, 5, 6, 7 and 81 1 When using P721m/P731m controllers, the 6Gb SAS BL Switch cannot be installed in c7000 interconnect bays 3 and 4. (The P721m/P731m controller cannot be installed in server expansion slot 1, which maps to interconnect bays 3 and 4.) To achieve proper connections, the interconnect bay in which you install the switch must match up to the expansion slot in which the controller is installed. Connections between the controller on the server blade and the SAS switch in the BladeSystem interconnect bays are through independent traces (mappings) on the BladeSystem c-Class enclosure midplane. For detailed information about port mappings for the c3000 and c7000 enclosures, see the HP BladeSystem Onboard Administrator User Guide, c3000 or c7000 user documents, and "Device relationships and mapping information" (page 50). As with other BladeSystem devices, the HP 6Gb SAS BL Switch can be managed through the Onboard Administrator web interface. In addition, the Virtual SAS Manager application provides switch-specific tasks, such as creating and assigning zone groups and updating switch firmware. 20 Device information