HP DL320 hp ProLiant DL320 generation 2 server high-density deployment - Page 4

DL320 generation 2 server power, thermal, and weight parameters - proliant dl320s

Page 4 highlights

hp ProLiant DL320 generation 2 server high-density deployment technical white paper 4 Table 1 demonstrates how significant reduction in input current and thermal dissipation can be realized, if a deployment plan can limit each server configuration over the useful lifetime of a rack configuration. Table 1. Derated Current and Thermal Dissipation for Reduced Input Power Assumptions Input Power Input Current at 110 VAC Input Current at 208 VAC Thermal Dissipation 120 W 1.09 A 0.57 A 409 BTUs/hour Derated 250 W 2.27 A 1.20 A 852 BTUs/hour Fully Rated 277 W 2.52 A 1.33A 944 BTUs/hour The derated input power values of 120 W and 250 W can be correlated with the measured input power values for the minimum and maximum configurations of the server. However, the derated input power value must be high enough to account for any future upgrades for a deployment plan. As stated earlier, the power supply is designed to support future processor and hard drive upgrades. When installing 42 servers, the number of PDUs to be installed will depend on the support for the input current requirement. Carefully derating the input power may very well satisfy deployment needs and also reduce the number of PDUs per rack. Reducing the number of PDUs has a direct impact on the deployment time and maintenance of an installation. DL320 generation 2 server power, thermal, and weight parameters Table 2 provides server parameters necessary to calculate the power, thermal, and weight requirements for any number of servers. Table 2. ProLiant DL320 Generation 2 Server Parameters Item @ Dimensions HxWxD 4.24x48.3x55.6 cm (1.67x19.0x21.9 in) - including bezel Server Weights Minimum Configuration: 1x processor, 1x128-MB DIMM, 1x CD/Diskette Blank, 0x HDD Standard Configuration: 1x processor, 1x128-MB DIMM, 1x HDD, 1x CD/Diskette Assembly Maximum Configuration: 1x processor, 4x DIMMs, 2x HDDs, 1x SA431, 1x CD/Diskette Assembly Component Weights CD/Diskette Drive Assembly DIMM HDD Remote Insight Lights-Out Edition SA5302 Power Ratings Maximum Power Supply Rated Input AC Power 240 V Maximum System Measured Input AC Power 110 V Specification 19.8 lb (8.98 kg) 22.1 lb 10.02 kg) 24.6 lb 11.16 kg) 1.4 lb (0.63 kg) 0.1 lb (0.05 kg) 1.3 lb (0.59 kg) 0.5 lb (0.23 kg) 1.0 lb (0.45 kg) 277 W 231 W

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

hp ProLiant DL320 generation 2 server high-density deployment technical white paper
4
Table 1 demonstrates how significant reduction in input current and thermal dissipation can be
realized, if a deployment plan can limit each server configuration over the useful lifetime of a
rack configuration.
Table 1.
Derated Current and Thermal Dissipation for Reduced Input Power Assumptions
Input Power
Derated
Fully Rated
120 W
250 W
277 W
Input Current at 110
VAC
1.09 A
2.27 A
2.52 A
Input Current at 208
VAC
0.57 A
1.20 A
1.33A
Thermal Dissipation
409 BTUs/hour
852 BTUs/hour
944 BTUs/hour
The derated input power values of 120 W and 250 W can be correlated with the measured input
power values for the minimum and maximum configurations of the server. However, the derated
input power value must be high enough to account for any future upgrades for a deployment plan.
As stated earlier, the power supply is designed to support future processor and hard drive
upgrades. When installing 42 servers, the number of PDUs to be installed will depend on the
support for the input current requirement. Carefully derating the input power may very well
satisfy deployment needs and also reduce the number of PDUs per rack. Reducing the number of
PDUs has a direct impact on the deployment time and maintenance of an installation.
DL320 generation 2 server power, thermal, and weight parameters
Table 2 provides server parameters necessary to calculate the power, thermal, and weight
requirements for any number of servers.
Table 2.
ProLiant DL320 Generation 2 Server Parameters
Item
@
Specification
Dimensions HxWxD
4.24x48.3x55.6 cm (1.67x19.0x21.9 in) – including bezel
Server Weights
Minimum Configuration: 1x processor, 1x128-MB DIMM, 1x CD/Diskette Blank, 0x HDD
19.8 lb (8.98 kg)
Standard Configuration: 1x processor, 1x128-MB DIMM, 1x HDD, 1x CD/Diskette Assembly
22.1 lb 10.02 kg)
Maximum Configuration: 1x processor, 4x DIMMs, 2x HDDs, 1x SA431, 1x CD/Diskette
Assembly
24.6 lb 11.16 kg)
Component Weights
CD/Diskette Drive Assembly
1.4 lb (0.63 kg)
DIMM
0.1 lb (0.05 kg)
HDD
1.3 lb (0.59 kg)
Remote Insight Lights-Out Edition
0.5 lb (0.23 kg)
SA5302
1.0 lb (0.45 kg)
Power Ratings
Maximum Power Supply Rated Input AC Power
240 V
277 W
Maximum System Measured Input AC Power
110 V
231 W