HP Dc5750 Hardware Reference Guide - dc5750 MT - Page 36
Removing Cables from Cable Retainers, Removing a Hard Drive
UPC - 883585056446
View all HP Dc5750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
7. Remove the power cable (1) and primary data cable (2) and secondary data cable (if necessary) (3) from the cable retainers to make it easier to access the drive. Figure 2-24 Removing Cables from Cable Retainers 8. Release the drive by pulling the green release tab away from the drive (1) and sliding the drive out of the bay (2). Figure 2-25 Removing a Hard Drive 9. Remove the four guide screws (two on each side) from the old drive. You will need these screws to install a new drive. 30 Chapter 2 Hardware Upgrades ENWW
7.
Remove the power cable (1) and primary data cable (2) and secondary data cable (if necessary)
(3) from the cable retainers to make it easier to access the drive.
Figure 2-24
Removing Cables from Cable Retainers
8.
Release the drive by pulling the green release tab away from the drive (1) and sliding the drive out
of the bay (2).
Figure 2-25
Removing a Hard Drive
9.
Remove the four guide screws (two on each side) from the old drive. You will need these screws
to install a new drive.
30
Chapter 2
Hardware Upgrades
ENWW