HP Dc7600 Computer Setup (F10) Utility Guide - Page 27

Computer Setup (F10) Utility Computer Setup (Continued) Heading Option Description Advanced* (continued) *For advanced users only. Onboard Devices PCI Devices Allows you to set resources for or disable onboard system devices (diskette controller, serial port, or parallel port). • Lists currently installed PCI devices and their IRQ settings. • Allows you to reconfigure IRQ settings for these devices or to disable them entirely. These settings have no effect under an APIC-based operating system. PCI VGA Configuration Displayed only if there are multiple PCI video adapters in the system. Allows you to specify which VGA controller will be the "boot" or primary VGA controller. ✎ In order to see this entry, you must enable Integrated Video (Advanced > Device Options) and Save Changes and Exit. Bus Options On some models, allows you to enable or disable: • PCI SERR# Generation. • PCI VGA palette snooping, which sets the VGA palette snooping bit in PCI configuration space; only needed when more than one graphics controller is installed. ✎ Support for specific Computer Setup options may vary depending on the hardware configuration. Computer Setup (F10) Utility Guide www.hp.com 23