HP DesignJet Z5400 Using your Printer - Page 139
Horizontal lines across the image (banding), Speed, Quality, Image, quality maintenance
View all HP DesignJet Z5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Alternatively, or if you have other print quality problems, you can continue reading this chapter. Horizontal lines across the image (banding) If your printed image suffers from added horizontal lines as shown (the color may vary): 1. Check that the paper type you have loaded corresponds to the paper type selected in the front panel and in your software. See View information about the paper on page 42. 2. Check that you are using appropriate print-quality settings for your purposes (see Printing on page 50). In some cases, you can overcome a print-quality problem merely by selecting a higher print-quality level. For instance, if you have set the Print Quality slider to Speed, try setting it to Quality. If you change the print-quality settings, you may wish to reprint your job at this point in case the problem has been solved. 3. Print the Image Diagnostics Print. See The Image Diagnostics Print on page 141. 4. If the printheads are working correctly, go to the front panel and press , then , then Image- quality maintenance > Calibration Status to see the paper advance calibration status. If the status is DEFAULT, try performing paper advance calibration: see Recalibrate the paper advance on page 127. If the problem persists despite all the above actions, contact your customer service representative for further support. ENWW Horizontal lines across the image (banding) 131