HP Designjet 4500 HP Designjet 4500 Printer Series - Setup Poster - Page 2

HP Designjet 4500 Printer series Assembly Instructions ©2005 Hewlett-Packard Company. Inkjet Commercial Divison Avenida Graells 501 08174 Sant Cugat del Vallès, Barcelona Spain All rights reserved. Q1272-90061 EN In case of difficulty, please consult: Your printer's Embedded Web Server 1 Read these instructions carefully... What you will need for this procedure Because some of the components of the printer are bulky, you will need up to four people to lift them. When this is necessary, this symbol is displayed: 2 Scanner (mfp only) Printer working area HP Designjet 4500 with Scanner. If you have bought the HP Designjet 4500 with a scanner, you can reduce the overall setup time by assembling the scanner first and then switching it on. The scanner will take one hour to warm up when started for the first time. A 3 Driver and Documentation CD To assemble the printer you will need at least 3 × 5 m (10 × 16 ft) of empty floor space, and about four hours. Before you start unpacking, consider where you are going to put the assembled printer. You should allow some clear space at the back and at the front of the printer. The recommended clearances are shown in the illustration above. Cut the strap around the boxes carefully, as the boxes may fall as soon as the strap is cut.