HP Dv6 1360us HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide - Page 54
Hard drive, of the hard drive cover, swing it up and to the left, and remove the cover
UPC - 884962549117
View all HP Dv6 1360us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Removal and replacement procedures Hard drive ✎ The hard drive spare part kit includes left and right bracket rails, a connector cable, Mylar cover with tab, and 4 rubber isolators. Description 500-GB, 7200-rpm hard drive 500-GB, 5400-rpm hard drive 320-GB, 7200-rpm hard drive (select models only) 320-GB, 5400-rpm hard drive 250-GB, 7200-rpm hard drive (select models only) 250-GB, 5400-rpm hard drive Hard Drive Hardware Kit (includes left and right bracket rails, connector cable, Mylar cover with tab, and 4 rubber isolators) Spare part number 575476-001 509417-002 509413-002 509415-002 509412-002 509414-002 483862-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). Remove the hard drive: 1. Position the computer with the front toward you. 2. Loosen the two Phillips PM2.5×5.5 captive screws 1 that secure the hard drive cover to the computer. 3. Lift the right side 2 of the hard drive cover, swing it up and to the left, and remove the cover 3. 4. Use the Mylar tab 1 to slide the hard drive to the left 2 to release it from the hard drive bay. 5. Disconnect the hard drive cable 3 from the system board. Maintenance and Service Guide 4-15