HP Dx2250 HP Compaq dx2250 Business PC, Service Reference Guide, 1st Edition - Page 118
Activity, Possible Cause, Recommended Action, Green Power LED flashes six
UPC - 883585243983
View all HP Dx2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Activity Possible Cause Green Power LED flashes six Pre-video graphics error. times, once every second, followed by a two second pause. Green Power LED flashes eight Invalid ROM based on bad times, once every second, followed checksum. by a two second pause. System does not power on and LEDs are not flashing. System unable to power on. Recommended Action For systems with a graphics card: 1. Reseat the graphics card. 2. Replace the graphics card. 3. Replace the system board. For systems with integrated graphics, replace the system board. 1. Reflash the system ROM with the latest BIOS image. 2. Replace the system board. Press and hold the power button for less than 4 seconds. If the hard drive LED turns green, the power button is working correctly. Try the following: 1. Check that the voltage selector (some models), located on the rear of the power supply, is set to the appropriate voltage. Proper voltage setting depends on your region. 2. Replace the system board. OR Press and hold the power button for less than 4 seconds. If the hard drive LED does not turn on green then: 1. Check that the unit is plugged into a working AC outlet. 2. Open hood and check that the power button harness is properly connected to the system board. 3. Check that both power supply cables are properly connected to the system board. 4. Check to see if the 5V_aux light on the system board is turned on. If it is turned on, then replace the power button harness. If the problem persists, replace the system board. 5. If the 5V_aux light on the system board is not turned on, remove the expansion cards one at a time until the 5V_aux light on the system board turns on. It the problem persists, replace the power supply. 112 Appendix C POST Error Messages ENWW