HP Dx2300 Computer Setup (F10) Utility Guide - dx2300 MT - Page 10
Option, Description, Date mm:dd:yy, Time hh:mm:ss, SATA Port 1, SATA Port 2, SATA Port 3, SATA Port
UPC - 883585669479
View all HP Dx2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Computer Setup-Main NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 3 Computer Setup-Main Option Description Date (mm:dd:yy) Allows you to set system date. Time (hh:mm:ss) Allows you to set system time. SATA Port 1 For each, allows you to: SATA Port 2 ● run HDD self-test for selected channel: SATA Port 3 SATA Port 4 ● SMART Status Check ● HDD Short Self-Test ● HDD Extended Self-Test ● auto-detect HDD size and head ● set extended IDE drive on selected channel to: ● None ● Auto ● set access mode on selected channel to: ● Large ● Auto ● view: ● Firmware ● Capacity ● Cylinder ● Head ● Precomp ● Landing Zone ● Sector Onboard FDC Controller Disables/enables the floppy disk controller. Drive A Allows you to set Drive A to: ● None ● 1.44M, 3.5 in. Halt On Allows you to set POST error behavior to: ● All Errors ● No Errors 4 Computer Setup (F10) Utility ENWW