HP Dx7500 Hardware Reference Guide - dx7500 Microtower Model - Page 42
Installing the Hard Drive in the Drive Cage - replacement hard drive
UPC - 884420980605
View all HP Dx7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
2. Slide the new drive into the hard drive cage (1), aligning the drive with the four screw holes on the cage. Install the four 6-32 standard screws that secure the hard disk drive to the hard drive cage (2). Make sure the hard disk drive cables are facing the top of the drive cage. NOTE: If you are replacing an old drive with a new drive, use the four retainer screws from the old drive to install the new drive. NOTE: If you are installing a second hard drive, use four of the extra standard 6-32 screws that are installed on the interior of the front bezel. The 6-32 screws are silver. Refer to Installing Additional Drives on page 24 for an illustration of the retainer screws location. Figure 2-31 Installing the Hard Drive in the Drive Cage 36 Chapter 2 Hardware Upgrades ENWW