HP ENVY 14-1011nr HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 74
Remove the four Philllips PM2.0×3.0 screws, Remove the retention rails
View all HP ENVY 14-1011nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
5. Open the computer as far as it will open. 6. Remove the four Phillips PM2.0×3.0 screws (1) that secure the optical drive to the base enclosure. 7. Remove the optical drive (2). 8. If it is necessary to replace the optical drive retention rails: a. Remove the four Philllips PM2.0×3.0 screws (1) that secure the retention rails to the optical drive. b. Remove the retention rails (2). 66 Chapter 4 Removal and replacement procedures
5.
Open the computer as far as it will open.
6.
Remove the four Phillips PM2.0×3.0 screws
(1)
that secure the optical drive to the base enclosure.
7.
Remove the optical drive
(2)
.
8.
If it is necessary to replace the optical drive retention rails:
a.
Remove the four Philllips PM2.0×3.0 screws
(1)
that secure the retention rails to the optical
drive.
b.
Remove the retention rails
(2)
.
66
Chapter 4
Removal and replacement procedures