HP ENVY 14-1011nr HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 76
System board, Reverse this procedure to install the power connector cable.
View all HP ENVY 14-1011nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Remove the power connector cable: 1. Disconnect the power extension cable (1) from the battery connector board. 2. Release the power extension cord (2) from the system board. (The power extension cord is attached to the system board with double-sided tape.) 3. Disconnect the power connector cable (3) from the system board. 4. Release the power connector (4) from the alignment clip built into the base enclosure. 5. Remove the power connector cable. Reverse this procedure to install the power connector cable. System board NOTE: The system board spare part kit includes replacement thermal material. Replacement thermal material is also available in the Thermal Material Kit, spare part number 634366-001. Description For use only on computer models equipped with an Intel Core i7 processor For use only on computer models equipped with an Intel Core i5, i3, or Pentium processor Spare part number 608365-001 608364-001 68 Chapter 4 Removal and replacement procedures