HP ENVY 14-1100 HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 70
Remove the Philllips PM2.0×3.0 screw, that secures the connector board to the optical
View all HP ENVY 14-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
7. Remove the optical drive (2). 8. If it is necessary to replace the optical drive retention rails: a. Remove the four Philllips PM2.0×3.0 screws (1) that secure the retention rails to the optical drive. b. Remove the retention rails (2). 9. If it is necessary to replace the optical drive connector board: a. Remove the Philllips PM2.0×3.0 screw (1) that secures the connector board to the optical drive. 60 Chapter 4 Removal and replacement procedures
7.
Remove the optical drive
(2)
.
8.
If it is necessary to replace the optical drive retention rails:
a.
Remove the four Philllips PM2.0×3.0 screws
(1)
that secure the retention rails to the optical
drive.
b.
Remove the retention rails
(2)
.
9.
If it is necessary to replace the optical drive connector board:
a.
Remove the Philllips PM2.0×3.0 screw
(1)
that secures the connector board to the optical
drive.
60
Chapter 4
Removal and replacement procedures