HP ENVY 14-1163se HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 72
Remove the SIM/WWAN board, Remove the Phillips PM2.0×3.0 screw
View all HP ENVY 14-1163se manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
c. WWAN module (see WWAN module on page 44) d. Memory module/wireless module compartment cover (see WLAN module on page 47) e. Top cover (see Top cover on page 56) Remove the SIM/WWAN board: 1. Disconnect the Bluetooth module cable (1) from the SIM/WWAN board. 2. Release the grounding tape (2) that secures the SIM/WWAN cable to the base enclosure. 3. Release the ZIF connector to which the SIM/WWAN board cable is attached, and then disconnect the cable (3) from the system board. 4. Remove the Phillips PM2.0×3.0 screw (4) that secures the SIM/WWAN board to the base enclosure. 5. Remove the SIM/WWAN board (5) and cable. Reverse this procedure to install the SIM/WWAN board and cable. 64 Chapter 4 Removal and replacement procedures
c.
WWAN module (see
WWAN module
on page
44
)
d.
Memory module/wireless module compartment cover (see
WLAN module
on page
47
)
e.
Top cover (see
Top cover
on page
56
)
Remove the SIM/WWAN board:
1.
Disconnect the Bluetooth module cable
(1)
from the SIM/WWAN board.
2.
Release the grounding tape
(2)
that secures the SIM/WWAN cable to the base enclosure.
3.
Release the ZIF connector to which the SIM/WWAN board cable is attached, and then
disconnect the cable
(3)
from the system board.
4.
Remove the Phillips PM2.0×3.0 screw
(4)
that secures the SIM/WWAN board to the base
enclosure.
5.
Remove the SIM/WWAN board
(5)
and cable.
Reverse this procedure to install the SIM/WWAN board and cable.
64
Chapter 4
Removal and replacement procedures