HP ENVY 14-1163se HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 73
Optical drive, Turn the computer upside down, with the front toward you.
View all HP ENVY 14-1163se manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Optical drive Description DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe (includes cable, connector board, and retention rails) Spare part number 608374-001 Before removing the optical drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery cover and battery (see Battery on page 39). 5. Remove the memory module/wireless module compartment cover (see WLAN module on page 47). 6. Remove the top cover (see Top cover on page 56). Remove the optical drive: 1. Close the computer. 2. Turn the computer upside down, with the front toward you. 3. Release the ZIF connector (1) to which the optical drive cable is attached, and then disconnect the cable (2) from the system board. 4. Turn the computer right-side up, with the front toward you. Component replacement procedures 65