HP ENVY 14-2161se HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 51
Remove the two Phillips PM2.0×2.83 screws that secure the WLAN module to the system board.
View all HP ENVY 14-2161se manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
4. Disconnect the WLAN antenna cables from the terminals on the WLAN module. NOTE: The 1/black WLAN antenna cable is connected to the WLAN module 1/Main/Tr1 terminal. The 2/gray WLAN antenna cable is connected to the WLAN module 2/Aux/Tr2 terminal. If a 3/yellow antenna cable is present, it is connected to the 3/Tr3 terminal. 5. Remove the two Phillips PM2.0×2.83 screws that secure the WLAN module to the system board. (The WLAN module tilts up.) Component replacement procedures 43
4.
Disconnect the WLAN antenna cables from the terminals on the WLAN module.
NOTE:
The 1/black WLAN antenna cable is connected to the WLAN module 1/Main/Tr1
terminal. The 2/gray WLAN antenna cable is connected to the WLAN module 2/Aux/Tr2
terminal. If a 3/yellow antenna cable is present, it is connected to the 3/Tr3 terminal.
5.
Remove the two Phillips PM2.0×2.83 screws that secure the WLAN module to the system board.
(The WLAN module tilts up.)
Component replacement procedures
43